other
Procurar
Casa e-switch-tact-switch
Reiniciar
592 resultados encontrados para "interruptor tátil de baixo perfil"
Foto Modelo Largura Tipo de montagem iluminação Classificação IP
tact switch 6.8x6.8mm Interruptor de tato de 4 pinos 6.80mm x 6.80mm Through Hole llluminated IP4X
 on and off tact switch ligado e desligado interruptor de tato 6.00mm x 6.00mm Through Hole Non-llluminated IP4X
tact switch 6x6mm Interruptor de tato da série. 6.00mm x 6.00mm Through Hole Non-llluminated IP4X
push button switch Interruptor de botão 3A DC 30V
tact switch Interruptor automotivo normalmente fechado 6.00mm x 6.00mm Through Hole Non-llluminated IP67
tactile switch Todo o interruptor de tato do condicionador de ar do carro 6.00mm x 6.00mm Surface Mount Non-llluminated IP4X
tactile switch SMT Interruptor tátil de borracha micro 6.00mm x 3.50mm Surface Mount Non-llluminated IP4X
tact switch SMD Micro tato switch 12V 3.00mm x 2.60mm Surface Mount Non-llluminated IP4X
tactile switch ultra fino SMD Interruptor de tato vertical de 4 pinos 6.00mm x 4.00mm Surface Mount Non-llluminated IP4X
tact switch Interruptor tátil iluminado 6.80mm x 6.80mm Through Hole llluminated IP4X
tactileswitch Double Action Dual Tatch Interruptor 19.00mm x 8.50mm Right Angle Non-llluminated IP4X
tactile switch 2 pin side switch tátil 6.00mm x 6.00mm Right Angle Non-llluminated IP4X
tact switch SMD Interruptor de tato 12V 6.20mm x 6.20mm Surface Mount Non-llluminated IP67
tact switch Impermeável SMD Interruptor de tato silencioso 7.40mm x 7.40mm Surface Mount Non-llluminated IP67
tactile switch Empurre o interruptor de tato
tactile switch 2 Pin 12 volt tato switch 6.00mm x 6.00mm Right Angle Non-llluminated IP4X

direito autoral © 2024 Wenzhou Gangyuan Electronics Co., Ltd.. Todos os direitos reservados. Poder por.

Rede IPv6 suportada

principal

Deixe um recado

Deixe um recado

    Se Você está interessado em nossos produtos e quer saber mais detalhes, por favor, deixe uma mensagem aqui, vamos responder você assim que nós puder.

  • #
  • #
  • #
  • #
    Atualize a imagem